Stainless Steel Shower Wheelchair Bearing SR8 1/2" ABEC-1 1/2x1-1/8x.3125" (4-Pack)
Stainless Steel Shower Wheelchair Bearing SR8 1/2" ABEC-1 1/2x1-1/8x.3125" (4-Pack)
We created a high-quality bearing line designed for wheelchairs. We wanted to create the smoothest ride for the longest time between service. To do that we focused on the causes of wheelchair bearing breakdown. Water is a wheelchair’s worst enemy, outside narrow-minded people. Our bearings have been designed to mitigate water at every turn. First, we use rubber seals instead of metal. Metal seals have to have big gaps to keep them from creating metal on metal friction. Second, we use high performance, water-resistant grease, Multemp SRL. The grease is designed to be very stable and smooth in a very wide temperature band and has a number of water-resistant additives.
The bearings are designed to handle harsh environments and keep on working. Each of our Bearing Kits comes with 4x high-quality bearings, 2x cotton swabs for cleaning and remove any old grease, 2x acetone wipes to clean hubs before re-greasing them, 1x high quality grease packet to add an anti-seize bearer between the bearing and the hub and a step by step instruction booklet to make sure you are on track. More zoom less squeak.
Used on the following wheelchair products:
- RAZ SP Shower Wheelchair
- Chineses Shower Wheelchairs that use a 1/2” Axle
Features:
- ABEC 1 High-quality bearings make for a smoother ride
- High-quality synthetic grease adds to a longer life, rust prevention, and smoother ride
- Specifically made for wheelchair
- Used in any shower wheelchair with a 1/2 axle that uses an SR8 bearing.
Warnings:
Improper removal or installation of bearings can permanently damage casters, rear wheel hubs or caster stems. Please use caution when using brute force.
Make sure you know the size and types of bearings on your wheelchair and buy the right sizes.