608 or 8mm Wheelchair Bearing Removal and Installation Took Kit

Description

If you want your wheelchair to move faster, go farther and smoother, then you have to maintain your wheelchair’s bearings.  Your wheelchair has bearings in three places: front caster, front fork, and rear wheels.  Most wheelchair manufacturers say you need to re-grease or change your front caster bearings yearly, and the forks and rear bearings as needed.  With the right tools, this is easy to do.  This kit includes 8mm Blind Bearing Puller, 8mm Bearing Installation Tool and 5/16 Brass Pin Punch which allows you to remove 8mm bearings found in your wheelchair's front caster wheels.

Features

1. Easy to use - this tool is designed specifically to remove bearings from wheelchair rear hubs or front forks
2. Cost-effective - you don’t have to buy an entire set of tools just for one or two sizes
3. Right tool for the job - most bearing tools are designed for bicycles or cars, not wheelchairs, so you have to make them work, which can damage your gear
4. Less risk of damage - specialized tool reduces the risk of damaging hub or front fork as compared to using a flat head screwdriver
5. Specialized design - designed to accommodate recessed hub for rear wheelchair wheels

Problems this product solves:

Problem 1:  Automotive bearing pullers pull from the lip of the inside ring of the bearing, but a wheelchair hub axle sleeve can prevent the puller from grabbing the ring

Used with the following wheelchair products:

1. Frog Leg Casters
2. .75” Lighted Rollerblade casters
3. .75” Rollerblade Casters
4. 1” Ploy Aluminum Caster
5. 1” Pneumatic Caster
6. 1” Ploy Caster (Pr1mo)
7. 1.5” Poly Caster
8. 1.5” Soft Roll Aluminum Casters
9. 2” Ploy Caster (Pr1mo)
10. 2” Pneumatic Caster with Foam Insert (Innova)

Warnings:

1. Improper removal or installation of bearings can permanently damage casters, rear wheel hubs or caster stems.  Please use caution when using brute force.
2. Make sure you know the size and types of bearings on your wheelchair and buy the right sizes.
3. If you have questions or if we can help please contact us.